Chapter 2 - Features set
User Manual
R5000 series - Web GUI
79
CAUTION
If any configuration changes are introduced via the Web interface later on, the
configuration re-initializes and all CLI configured parameters are reset to default. Use this
section to add CLI specific commands to the configuration in order to preserve the fine-
tuning settings.
The commands that do not have the enhanced parameters displayed in Web
interface are: sys, ifconfig, prf, qm, tun, route, mint, switch, svi, lag, sntp, dhcpc:
Figure 51 - Extra commands
Parameter
Description
Command
Select the command to add it to the device
configuration
Parameters
Insert the string to specify the command parameters
and options
Please refer to WANFleX OS User Manual for the full
explanation of all command parameters and options
Disabled
Check this option in order to disable the command
temporarily
Table 22 - Extra commands
Up/Down arrows allow you to organize the command list
Press the «Remove Command» button if you want to delete the command from
the list permanently
Press the «Add command» button if you want to add the command to the list
Example given
: choose “sys” command from the dropdown menu, type “no indicator”
in the parameter field and then press the «Apply» button; this command will be saved
