Inficon 550-520, Translation Of The Original Operating Instructions

Page: 121 / 146

INFICON Accessories and interfaces | 10
UL6000-Fab-Operating-instructions-iina75en1-04-(2109) 121 / 146
Sniffer tip, rigid, 500 mm. 45° angled(ST 500) 12272
Further accessories for the SL3000
Felt For Capillary Filter SL3xx, 50 pc. 200001116
Capillary filter, metal(1 unit) 12217
Capillary Filter SL 300, set 5 pieces(Plastic capillary filter) 20003501
Intern Filter For SL3XX (5/PKG)(Sinter-filter with O-Ring) 20003500
Water conservation tip (1 unit) 122 46
SL3000 bracket 551-203
Remote control RC1000
Remote control RC1000WL, wireless 551-015
Remote control RC1000C, wired 551-010
Remote control extension cable, 8 m length 14022
Miscellaneous
Helium bottle holder 551-201
Search gas spray gun, with hose 16555
Sniffer line SL200
By using the sniffer line the leak detector can easily be converted to a sniffer leak
searcher. The length of the sniffer line is 3.8 m.
To operate this sniffer line you also need a cable extension for the electrical
connection.
For mounting the hooks for winding up the power line or sniffer line, see “Connect the
supplied accessories [
}
44]“.
Sniffer line SL3000
The sniffer line SL3000 is connected to the rear of the leak detector, so that a vacuum
installation at the inlet flange on top of the leak detector does not have to be removed
when changing to the operation mode "Sniffer". The sniffer line is available in 3, 5, 10
or 15 m lengths.
For mounting the hooks for winding up the power line or sniffer line, see “Connect the
supplied accessories [ } 44]“.
Helium bottle holder
The Helium bottle holder allows the transport of a Helium supply with a spray gun
along with the leak detector. Only small to medium-sized bottles (maximum 10 l,
maximum bottle size including protective cap 98 cm, 200 bar) fit without affecting the
stability of the device.