![background image](http://html1.mh-extra.com/html/indmar/raptor-jet-series/raptor-jet-series_operators-manual_2053965062.webp)
8-2
SECTION EIGHT
GENERAL PREPARATION
Before beginning you will need the following supplies:
x
Indmar Fuel Treatment
x
8 quarts of Appropriate Engine Oil
x
Indmar Oil Filter (P/N 872025 or 501022S)
x
4-6 ounces of Fogging Oil
x
1 can Corrosion Protectant and Lubricant
x
Indmar Marine Waterproof Grease
x
Pipe Thread Sealant
x
Anti-Freeze Tester suitable for Propylene Glycol
x
Propylene Glycol Anti-Freeze (As required)
Fuel System Treatment
!
WARNING
Running the engine with the flame arrestor
removed increases the possibility of fire or
explosion if engine backfire occurs and gasoline
fumes are present. If the engine is operated
without the flame arrestor secured, extreme
care must be taken to ensure that the engine
compartment is well ventilated and that no fuel
leaks are present.
1. If the boat is to be placed in storage with fuel in the
tank(s) that does not contain alcohol, fill the fuel
tank(s) with fresh fuel and a sufficient amount of
gasoline stabilizer to treat the entire tank. Follow
instructions on the container.
2. Start the engine and operate at Idle RPM until the
engine reaches normal operating temperature.
(If using a hose and adapter, adjust the faucet to
avoid over-cooling the engine at low RPM.) Run the
engine for at least 15 minutes to ensure that the fuel
stabilizer enters the engine’s fuel system.
Summary of Contents for Raptor JET SERIES
