Indmar Raptor JET SERIES Operator'S Manual Download Page 20 | Manualshive

Page: 20 / 82

background image

1-4

SECTION ONE

!

WARNING

Always operate the bilge blower at least 4
minutes prior to starting the engine. Raise the
engine cover to ventilate fumes. Inspect the
engine and compartment for any ﬂuid or fuel
leaks.

x

Do not smoke or allow open ﬂames or sparks nearby
when refueling.

x

Always stop the engine before refueling.

x

Maintain contact between the fuel nozzle and the fuel
tank or container to prevent electrostatic spark. Do not
use a plastic funnel.

x

Do not block fuel vents.

x

Do not store fuel in any containers or compartments
which are not designated for fuel storage and do not
use these storage areas for any other purpose.

BATTERY

!

DANGER

Explosive battery fumes may accumulate in the
engine compartment. While the engine is running
or the battery is charging, hydrogen gas is being
produced by a lead acid battery and can be
easily ignited. Failure to properly ventilate fumes
with the bilge blower may result in explosive
atmosphere.

x

Wear personal protective equipment when working on
or around batteries.

x

Do not smoke or bring a ﬂame near a battery.

x

Do not check for a dead battery by placing a metal
object between the battery posts. Sparks could cause
an explosion.

x

Do not place your head directly above a battery when
making or breaking electrical connections.

«
...
18
19
20
21
22
...
»

Summary of Contents for Raptor JET SERIES



















































































Reviews:

No comments

Related manuals for Raptor JET SERIES

Brand: RCGF Pages: 22

Brand: Quick Fuel Technology Pages: 5

Brand: Scania Pages: 83

Brand: Briggs & Stratton Pages: 26

COMBIFLUX FP 314 PVDF

Brand: Flux Pages: 28

Brand: KONTRONIK Pages: 6

Brand: Yamakoyo Pages: 41

Brand: Briggs & Stratton Pages: 200

Brand: Lycoming Pages: 568

SKALAR SC Series

Brand: Hacker Pages: 2

Brand: Gude Pages: 52

Brand: GPOWER Pages: 4

Brand: V2 Pages: 6

Brand: RIEJU Pages: 63

Brand: NANOTEC Pages: 295

Brand: Suzuki Pages: 133

Brand: Sanyo Denki Pages: 20

Brand: Tahmazo Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands