Indmar Raptor JET SERIES Operator'S Manual Download Page 3 | Manualshive

Page: 3 / 82

background image

i

© 2016 Indmar Marine Engines

WELCOME

Dear Indmar Marine Engine Owner:

Thank you for selecting a boat powered by an Indmar Marine engine. Indmar is proud to provide the power to the best
boat companies in the business and we hope that pride shows in the quality of our products. In the unlikely event that
you have a defect-related problem with your boat’s engine or drive train, you can rest assured knowing it is backed by
our industry-leading ﬁve-year warranty coverage on premium models.

This is an exciting year for Indmar and for the marine industry. Indmar has joined forces with Ford Motor Company to
produce a line of marine engines designed to exceed customer expectations. The 6.2L Ford-based engines are fuel
injected and equipped with catalytic converter exhaust systems to provide a cleaner and safer boating experience for
you and your family.

If you have any questions concerning your engine that are not covered in this manual, please feel welcome to contact
Indmar Customer Service at (901) 353-9930 or visit our website, www.indmar.com, and submit your question.

Thanks again for choosing an Indmar-powered boat. We wish you safe, trouble-free boating.

Sincerely,

Team Indmar

«
1
2
3
4
5
...
»

Summary of Contents for Raptor JET SERIES



















































































Reviews:

No comments

Related manuals for Raptor JET SERIES

Brand: ZIEHL-ABEGG Pages: 84

Brand: Beta Marine Pages: 88

Brand: Eurotronic Pages: 4

Brand: D+H Pages: 20

Brand: ALL POWER AMERICA Pages: 28

Brand: de Gier Pages: 26

OMEGAFLEX FPU5-MT-110

Brand: Omega Engineering Pages: 83

Brand: York Pages: 40

Brand: Mercury Pages: 878

Brand: Stark Pages: 14

Brand: Siemens Pages: 20

Brand: Siemens Pages: 26

Brand: Siemens Pages: 40

Brand: Siemens Pages: 87

Brand: Siemens Pages: 96

Brand: Siemens Pages: 116

Brand: Siemens Pages: 156

Brand: Siemens Pages: 252

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands