Indmar Raptor JET SERIES Operator'S Manual Download Page 17

Page: 17 / 82

1-1

Section One

SAFETY

The words DANGER, WARNING, CAUTION and
NOTICE are used throughout this manual to highlight
important information. Be certain that the meanings of
these alerts are known to all who work on or near the
equipment.

Follow the safety information throughout this manual in
addition to the safety policies and procedures of your
employer.

This safety alert symbol appears with most safety

statements. It means attention, become alert, your
safety is involved! Please read and abide by the
message that follows the safety alert symbol.

DANGER

Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.

NOTICE

Indicates a situation which can cause damage to the
engine, personal property and/or the environment, or
cause the equipment to operate improperly.

OTE:

Indicates a procedure, practice or condition that
should be followed in order for the engine or
component to function in the manner intended.

Summary of Contents for Raptor JET SERIES



















































































Search results

Summary of Contents for Raptor JET SERIES

Reviews:

Related manuals for Raptor JET SERIES

Brands by name

Popular brands

Indmar Raptor JET SERIES, Operator'S Manual

Search results

Summary of Contents for Raptor JET SERIES

Reviews:

Related manuals for Raptor JET SERIES

Brands by name

Popular brands