![background image](http://html1.mh-extra.com/html/indmar/raptor-jet-series/raptor-jet-series_operators-manual_2053965054.webp)
7-10
SECTION SEVEN
MAX
MIN
INDM-0016
1
Figure 7.6 – High Fill Tank
Check coolant level daily. The level in the high fill tank
should be maintained at the “MIN” mark (1, Figure 7.6)
when the engine is cold.
!
CAUTION
Engine damage:
• Failure to maintain the coolant at the proper
level can cause engine damage. Your
warranty will not cover engine damage due to
overheating or any other cause associated with
improper coolant levels.
• Use only propylene glycol coolant. Use of any
other coolant or mixing coolant types can
cause engine damage. Damage to your engine
from use of any other type of coolant is not
covered by warranty.
NOTICE
The coolant system should be flushed and coolant
replaced every two years. This should be performed by a
qualified Indmar service technician.
When adding coolant, add only a 50/50 mix of Indmar
propylene glycol coolant (P/N 872027) and distilled
water in accordance with the directions on the container.
Do not overfill the tank. Do not mix anti-freeze types.
Do not use concentrations that exceed manufacturer’s
specifications.
Summary of Contents for Raptor JET SERIES
