Indmar Raptor JET SERIES, Operator'S Manual

Page: 12 / 82

x
Lubricant :
Standard and Premium Models – Semi-synthetic 5W-
30 oil meeting the API rating of SN
Supercharged Models – Fully synthetic 15W-50 oil
meeting the API rating of SN
Additives – The only additive that is recommended by
Indmar for use in your engine is Indmar Fuel Treatment.
This additive helps preserve the fuel in your tank and
in the engine’s fuel system. We recommend the use
of Indmar Fuel Treatment during off-season storage
and for the boater that consumes less than a full tank
of fuel every two weeks. Refer to Section 2, General
Information, for more information.
EPA EMISSION-RELATED WARRANTY
REQUIREMENTS
Your new engine is designed, built and equipped so it
conforms at the time of sale to the ultimate purchaser
with the requirements of CFR 40, part 1045.120. It is
free from defects in materials and workmanship that may
keep it from meeting these requirements.
The minimum emission-related warranty period is
3 years/480 hours, whichever comes first. The emission-
related warranty covers all components whose failure
would increase an engine’s emissions of any regulated
pollutant, including components listed in the following
section and components from any other system
developed to control emissions.
EMISSIONS COMPONENTS WARRANTY
The following components are considered as part of the
emissions control system and are covered under the
Emissions Control Warranty.
1. Fuel Metering System
A. Fuel injectors
B. Fuel pressure regulator/sensor
C. Manifold Absolute Pressure Sensor
D. Throttle Position Sensor
E. Idle Air Control Valve
F. Throttle Body – Port Fuel Injection Models
G. Throttle Body Assembly – Throttle Body Fuel
Injection Models
H. Coolant Temperature Sensor
I. Intake Valves
J. Oxygen Sensors
2. Air Induction System
A. Intake Manifold
B. Air Filter (Flame Arrestor)
3. Ignition System
A. Spark Plugs
B. Electronic Ignition System
C. Ignition coil and/or control module
D. Ignition
Wires
4. Lubrication System
A. Oil pump and internal parts