1.18
Getting started
Initial settings software is already installed on your Imagistics fax machine. It
guides you through the process of entering the following settings. These settings you
make here can always be changed later.
• Language used on the LCD and Lists
• Current Day and Time
• Automatic Daylight saving time adjustment
• Fax reception mode
• Phone dialing type (pulse or tone)
• Subscriber ID (your fax phone number)
• Your TTI (your name; up to 3)
• TTI select (which one of the 3 is to be used)
• Time, in minutes, before entering the sleep mode
Getting started
Determine the following before you go any further:
1
The type of dialing your telephone system requires — Choose either Tone
or Pulse (rotary) dialing.
2
The name and fax number you want to appear on your faxes —
Every fax page you send arrives at the receiving machine with a single line of
text at the very top of the page. This text lists a name (called the Transmit
Terminal Identifier (
TTI
)) and a fax number (called the Subscriber
ID
).
The
TTI
cannot be longer than 22 characters.
Clearing stored settings
Before using Initial settings, clear your machine’s built-in user data memory. This
ensures the memory will hold only your settings.
Important: After you use Initial settings, do not clear the memory again unless
an authorized technician asks you to do so.
To clear the machine’s memory:
1
Press
MENU
, *, 0, 2. The
LCD
now asks if you want to clear the memory:
Note: If you don’t want to clear the memory, just press
CANCEL
.
2
If you do want to clear the memory, press
ENTER
.
Entering initial settings
Important: If you press
STOP
during Initial settings, your fax machine returns to
standby mode (its normal condition). But it will keep the settings you
saved by pressing
ENTER
as described in these instructions.
1
To start Initial settings software, press
MENU
, 9,
ENTER
. The
LCD
shows:
2
Using the cursor key, select the language you want.
3
Press
ENTER
to save the language setting and continue.
9. User Install
9. User Install
Select Language
Select Language
English
French
User Data Clear
Confirm
[ Cancel ] [ Enter ]
Initial settings
