imagistics VarioPrint 5000 Operating Manual Download Page 30

Page: 30 / 146

1.19

Getting started

The

LCD

now shows the current calendar/clock setting, with a cursor appear-

ing on the first digit.

Use the numeric keypad to enter the correct date and time, using a

MMDDYY

format for the date and 24-hour format for the time. For instance, to set 2:30

on September 27, 2001, press 0 9 2 7 0 1 1 4 3 0, which results in:

Note: Your fax machine automatically inserts the spaces and date-slash. All

you have to do is enter the digits.

To change a digit, press

to move the cursor left, or

to move it right.

Then enter the correct digit.

Press

ENTER

to save the clock setting and continue.

The

LCD

now asks if you want to set the calendar/clock to automatically

recognize daylight saving time (

DST

When the setting is ON, your machine automatically recognizes

DST

at 2

the appropriate switchover Sundays each year.
When the setting is OFF, no automatic change will occur.

Using the cursor key, select the mode you want.

Press

ENTER

to save the setting and continue.

The

LCD

now shows the machine’s current reception mode.

For now, select Fax Ready. (This setting can always be changed. We’ll discuss
reception modes further on pages 2.7–2.8.)

Press

ENTER

to save the setting and continue.

The

LCD

now asks you to enter the type of dialing needed for the fax machine,

either tone or pulse:

Using the cursor key, select the mode you want.

Press

ENTER

to save the setting and continue.

The

LCD

now asks you to enter your fax number as you want it to appear on

other fax machines’ displays or printouts. The fax industry term for this
number is Subscriber

Use the numeric keypad to enter the fax number. The number may contain up
to 20 characters (numbers and dashes).

Note: To insert a dash, as shown here, press [ – ]. To insert “ + ” before the

country number for the overseas call, press [ + ].

Note: If you make a mistake, press

CANCEL

to erase to the left.

To change just one number, press

to move left, or

to move right.

Press

CANCEL

to erase the number. Then re-enter the fax number cor-

rectly.

Press

ENTER

to save the number and continue.

The

LCD

now asks you to enter the name you want to appear at the top of

faxes you send. You can enter three TTI’s.
Select TTI 1, 2 or 3 using the cursor key.

9. User Install

Exit

TTI 1 :Not Stored

TTI 1 :Not Stored
TTI 2 :Not Stored

TTI 2 :Not Stored

9.User Install

9.User Install
Enter Your Fax Number

Enter Your Fax Number
_

[ ][ - ]

9.User Install

9.User Install
Select Dialing Type

Select Dialing Type

Tone

Pulse

9. User Install

9. User Install
Select Rx Mode

Select Rx Mode

Fax Ready

Tel/Fax Ready

9. User Install

9. User Install
Daylight Saving

Daylight Saving

OFF

9. User Install

9. User Install
Enter Current Date and Time

Enter Current Date and Time

9/27 2001 14:30

9. User Install

9. User Install
Enter Current Date and Time

Enter Current Date and Time

1/01 2001 00:00

Summary of Contents for VarioPrint 5000



















































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

imagistics VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands