imagistics VarioPrint 5000 Operating Manual Download Page 121

Page: 121 / 146

Just in case …

If the printer jams

To clear a printout jammed inside your machine:

Important: Be careful not to put your hand between the top cover and the

machine.

Use the lifting point at the top right cor-
ner to open the top cover.

Open the printer cover.

Lift out the toner and the the
drum unit.

Important: Shield the drum unit from

light, especially strong
light. If you need to
remove the drum for an
extended period wrap it in
a thick cloth to protect it
from light.

Remove the jammed paper.

CAUTION:

The fuser unit becomes very hot.
Do not touch the fuser unit when you
are removing a paper jam.

Note: Avoid getting “unfixed” toner on

your hands and clothes.

Open the side cover.
Raise the jam release lever to remove
the jammed paper.

Close the side cover then reinstall the
toner and drum unit.

Gently close the printer cover, pressing
firmly on cover until you hear it click.

Gently lower the top cover.

5.2

lift

lift (green)

Summary of Contents for VarioPrint 5000



















































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

imagistics VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands