imagistics VarioPrint 5000 Operating Manual Download Page 50

Page: 50 / 146

3.3

Basic operation

Press

ENTER

. The

LCD

shows:

Important: If you want to quit without erasing the one-touch number

you’ve selected, press [No]. The fax will return to step 2.

Press [Yes] to erase the number.

To erase another one-touch number, repeat steps 2–4.
Otherwise, press

STOP

to return to standby mode.

Printing a list of one-touch numbers

Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key’s number, the Location

(if any) and

fax/telephone number you’ve stored in the key.
To print a list of one-touch numbers, press

MENU

, 5, 1, 0, 5,

ENTER

One-touch fax dialing

To dial a fax call using a one-touch number:

Place the the document in the

ADF

Adjust resolution and contrast if necessary.

Press the one-touch key in which you’ve stored the number.

What happens next depends on whether you specified memory transmission or
real time transmission:

If you specified Quick Memory transmission:

• Your fax machine scans the first page of your document into memory, then dials

the other fax machine.

• While dialing, your machine scans the other documents into memory.
• The

LCD

shows the Location

and the document’s width and resolution settings:

Note: If the one-touch key doesn’t have a Location

, the number appears.

• When the other machine answers, your fax transmits the scanned document

directly from memory. (To review Quick memory transmission, see page 2.2.)

If you specified normal memory transmission:

• Your fax machine scans your entire document into memory first, then dials the

other fax machine.

• The

LCD

shows the Location

and the document’s width and resolution settings:

Note: If the entry doesn’t have a Location

, the number appears.

• When the other machine answers, your fax transmits the document directly from

memory. (To review Memory transmission, see page 2.2.)

If you specified real time transmission:

• Your fax machine dials the other fax machine.
• The

LCD

shows the Location

and the document’s width and resolution settings:

Note: If the entry doesn’t have a Location

, the number appears.

• When the other machine answers, your fax feeds the document through its scan-

ner, transmitting as it goes. (To review Real time transmission, see page 2.3.)

One-touch phone dialing

To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine.

To make the call:

Obtain a dial tone by doing one of the following:
• Lift the optional handset
• Press

MONITOR

CALL

to use the monitor speaker

Press the one-touch key in which you’ve stored the number. As the machine
dials, it shows the number on the

LCD

Note: Remember that your fax machine’s monitor speaker is not a speakerphone.

If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.

Note: If the call fails, and you used

MONITOR

CALL

to dial, press

MONITOR

CALL

hang up.

Telephone

123-4567_
Normal

Normal

[ Tone ] [ Mode ] [ Contrast ]

02. Erase One-touch
Ok to Erase?

01 : 123-4567

[ Yes ] [ No ]

Summary of Contents for VarioPrint 5000



















































































































































Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands

imagistics VarioPrint 5000, Operating Manual

Search results

Summary of Contents for VarioPrint 5000

Reviews:

Related manuals for VarioPrint 5000

Brands by name

Popular brands