1.14
Getting started
Level one function
Level two function
Level three function
Summary of setting
Default setting
Page
2. User Settings
2.Fax Settings
01.Scan Parameters
You can set the following settings for send fax message.
• Primary resolution mode
Normal
• Primary contrast mode
Normal
4.1
• Scanning width limit
B4
02.Print Parameters
You can set the following settings for receive fax message.
• Reduction rate
Auto
• Reduction margin
40 mm
4.3
• Half-page reception
Off
03.Number of Rings
Number of rings before your machine answers.
2 times
4.4
04.Redial
Number of times and interval for automatic fax redialing.
3 times
4.5
1 minute
05.Dialing Pause
Dialing pause length.
2 seconds
4.5
06.Memory Transmission On/Off setting for Memory transmission.
On
4.2
07.Quick Memory Tx
On/Off setting for Quick Memory transmission.
On
4.2
08.TTI Transmission
On/Off setting for sending your TTI.
On
4.2
09.ECM Mode
On/Off setting for ECM mode.
On
4.2
10.Block Junk Fax
Reject the fax reception from unauthorized incoming faxes.
Off
3.56
11.Security Rx
Keep all received fax messages in memory and after print them.
Off
3.52
12.Separator Page
Partition each received documents by inserting the separator page. Off
3.30
13.Rotate Rx
On/Off setting for Rotate Rx.
Off
4.4
14.PIN Mode
Prevent unauthorized long-distance calls.
Off
3.54
15.DRD
Set the ring pattern to use with phone company’s Distinctive Ring
Off
3.32
service.
16.Remote Copy
Transfer the documents you have sent and/or received to other
Off
3.25
fax machine automatically.
17.Jobs Hold
Keep the command when the transmission error occurred or
Off
3.25
all redial attempts failed.
3.Copy Settings
01.Scan Parameters
You can set the following settings for copying.
• Primary resolution mode
Fine
• Primary contrast mode
Normal
4.6
• Scanning width limit
B4
02.Print Parameters
You can set the following settings for copying.
• Reduction rate
100%
• Reduction margin
24 mm
4.7
• Bypass Tray priority
Off
