imagistics DL170, Operating Manual

Page: 133 / 157

Just in case …
What you see on the
LCD
What it means/What to do
Macro In Use You tried to change the function for a Soft key,
but that Soft key has been programmed in a
Macro key. You cannot change the Soft key
function until you erase the Macro key that con-
tains the Soft key you want to change. Erase the
Macro key, then try again.
Memory Overflow During transmission (or copying), you tried to
Start Or Cancel enter more pages into memory than your fax
could store. Press
START
to tell your fax to keep
as many pages in memory as possible, or press
CANCEL
to delete from memory all pages stored
during this operation (but not previous opera-
tions).
Mirror Carriage Error The mirror carriage of your machine has become
inoperable. Call the ImagisticsDiagnostic
Center at 1 800 243 5556.
Mirror Locked The transport mode is not turned off.
Turn off the transport mode (see page 1.8).
No Command You pressed
REVIEW COMMANDS
to review
upcoming commands, but your fax machine had
none stored.
No Department Code You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
. . . or . . .
You entered incorrect department code to send a
fax, while the department feature is on. Enter
correct department code.
No Document Stored You tried to print a document from memory, but
your fax machine had none stored.
No Drum The drum unit is missing or has not been prop-
erly installed in your fax machine.
Please properly install the drum unit.
No Number Stored You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another
number or dial a phone number directly from the
numeric keypad.
What you see on the
LCD
What it means/What to do
No Passcode You tried to program a security feature (see
page 3.50), but there’s no protection passcode
stored in your fax machine. Store a protection
passcode in your machine, then retry again.
No PIN Number You selected “Mode1” in the
PIN
mask feature
and tried to call an autodialer number in which
no PIN has been entered, or you tried to call
using numeric keypad without
PIN
. Enter a
PIN
,
then try again.
No Report You requested an activity journal or confirma-
tion report, but your fax machine has no record
of any fax jobs having occurred.
No Toner Cartridge The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
Not Allowed in Macro During macro registration, you pressed a key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
Other Key Setting You tried to enter the same function which is
already stored in an another Soft key.
Store the different function.
Open Top Cover The paper is jammed in your fax machine.
Please Remove Paper Open the cover indicated on the LCD, and
Open 1st Side Cover
remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover Either your document wasn’t inserted correctly,
Reset Document or the fax to which you’re sending can’t handle
the document’s page length
. Reset the page and
try again.
Please Call Service The printer unit of your fax machine has
become inoperable. Call the Imagistics
Diagnostic Center at 1 800 243 5556.
5.7