imagistics DL170, Operating Manual

Page: 114 / 157

Memory transmission
Default setting: ON, scans all documents to memory before sending.
Note: When the machine’s memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
Note: When you use the
FBS
glass, the machine always uses memory transmission
even if you set the memory transmission to off.
To change the default setting of memory transmission:
1
Press Program key,
B
, 2, 0, 6,
ENTER
.
2
Press or until the mode you want appears.
In this example, we’ve chosen Off.
3
Press
ENTER
to save the setting.
If the
MEMORY TRANSMIT
light glows, memory transmission is on.
If the
MEMORY TRANSMIT
light doesn’t glow, memory transmission is off.
Quick Memory transmission (Dial while Scanning)
Default setting: ON, scan the first page to memory then begins sending while
remaining pages are being scanned.
Important: Your fax machine’s memory transmission feature must be turned on
to use Quick Memory transmission (see above).
To change the default setting of Quick Memory transmission:
1
Press Program key,
B
, 2, 0, 7,
ENTER
. The
LCD
shows:
2
Press or until the mode you want appears.
Here, we’ve chosen Off.
3
Press
ENTER
to save the setting.
TTI transmission
Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
TTI
), and a fax number. You can set the machine not to send the
TTI
.
1
Press Program key,
B
, 2, 0, 8,
ENTER
. The
LCD
shows:
2
Press or until the setting you want appears. In this example, we’ve
chosen Off.
3
Press
ENTER
to save the setting.
TTI Tx :Off
/ /Enter
TTI Tx :On
/ /Enter
Quick Tx :Off
/ /Enter
Quick Tx :On
/ /Enter
Memory Tx :Off
/ /Enter
Memory Tx :On
/ /Enter
Changing the default settings
4.2