imagistics DL170, Operating Manual

Page: 49 / 157

2.17
Basic operation
Combine
This feature allows you to copying from four one-sided originals to one sheet of
paper.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
DOCUMENT SIZE
.
4
Press
ADVANCED FUNCTIONS
twice,
ENTER
. The
LCD
shows the current setting:
Note: This feature is Off for default setting. However, you can turn on it for
the default. (See page 4.7.)
5
Press or until the setting you want appears.
In this example, we’ve chosen On.
6
Press
ENTER
to save the setting. The machine will return to the standby mode
with following display:
7
If needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
• Set copy reduction or enlargement ratio
8
Press
START
.
Note: To reset the copy parameter to default setting, press
COPY RESET
.
Note: To stop copying, press
STOP
.
Ultra copy mode
Note: Enlargement/Reduction copy is not available in this mode.
Note: This mode requires more memory than normal mode.
This feature allows copying with more high quality resolution.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing
DOCUMENT SIZE
.
4
Press
ADVANCED FUNCTIONS
three times,
ENTER
. The
LCD
shows the current
setting:
5
Press or until the setting you want appears.
In this example, we’ve chosen On.
6
Press
ENTER
to save the setting. The machine will return to the standby mode
with following display:
7
If needed, set the following:
• Select document type and adjust image contrast
• Enter the number of copies
8
Press
START
.
Note: To reset the copy parameter to default setting, press
COPY RESET
.
Note: To stop copying, press
STOP
.
Copy <Ultra Copy> 1
Ltr [ Ltr ] 100%
Ultra Copy :On
/ /Enter
Ultra Copy :Off
/ /Enter
Copy <Combine> 1
Ltr [ Ltr ] 100%
Combine :On
/ /Enter
Combine :Off
/ /Enter