imagistics DL170 Operating Manual Download Page 127

Page: 127 / 157

Just in case …

If an original document jams

If an original document jams in the

ADF

while scanning the document into the

memory for faxing or copying, the

LCD

will show:

If you do wish to continue the operation and keep all pages stored, press

ENTER

and proceed to step 2.

To abort the operation, press

CANCEL

. This will erase from memory all pages

stored during this operation, and the machine will return to standby mode.

Important: If you wait more than 60 seconds without pressing any key, the

machine will erase from memory all pages stored during this
operation and the machine will return to the standby mode.

Note: If a document jams during the following cases, the following message

will appear and the machine will abort the operation anyway; instead,
you’ll have to perform the job again from scratch.
- The first page of the document jammed
- During the real time transmission or quick memory transmission
- During non-sorting

ADF

job

Also, the “Repeat transmission. Error on scan at page xx” message
will be printed out if the document jammed during transmission.

The

LCD

will show which page (i. e., which page number) is jammed. To con-

tinue scanning from the jammed page forward (keeping in mind the Note at
the end of step 1, above), press

START

after clearing the jam.

Note: If you wait more than 60 seconds without pressing any key, the

machine will begin to send or copy the document(s) it has.

If you wish to cancel this operation, press

STOP

. The machine will delete all

pages from memory and then return to its standby mode.

To remove the document:

Open the scanner cover.

Lift the original document from the
machine.

Note: If you cannot remove the origi-

nal document, open the inner
cover as shown at right, then
remove the document.

Gently close the scanner cover, making sure both sides are snapped down
securely.

Note: If the original document has become wrinkled or torn, do not re-send

it.

p 2. Reset Document
Press Start Key

Open&Close ScanCover
Reset Document

Document Jam
ContStor Enter/Cancl

5.1

Clearing paper jams

Summary of Contents for DL170






























































































































































Search results

Summary of Contents for DL170

Reviews:

Related manuals for DL170

Brands by name

Popular brands

imagistics DL170, Operating Manual

Search results

Summary of Contents for DL170

Reviews:

Related manuals for DL170

Brands by name

Popular brands