imagistics DL170, Operating Manual

Page: 20 / 157

Adjust the monitor speaker’s volume
You can set the volume of the monitor speaker.
1
Press
MONITOR
/
CALL
on the control panel. You now should hear a dial tone.
And press or of the cursor key. The
LCD
indicates the volume:
2
To turn the volume up, press .
To turn the volume down, press .
3
Press
MONITOR
/
CALL
again to hang up.
Loading paper
Acceptable paper size and cassette capacity
Paper source Paper type Paper size Capacity
Paper cassette Plain paper* 1 Letter , Legal , Half-letter 500 sheets
Letter , Legal , Half-letter ,
Plain paper* 1 A4 , A5 , A6 , F4 , 50 sheets
Bypass Tray Executive , Custom-sized*
2
Envelopes DL , CM10 , Monarch 1 sheet
Postcard 3.9” x 5.8”
(100
x
148mm)
20 sheets
Transparency* 3 Letter 20 sheets
*
1
Paper weight: 60 – 90 g/m
2
* 2 (3.8 – 8.5) inches ˘ (5.5 – 14.0) inches (Width ˘ Length) : It only can use if the
optional Printer Controller is attached.
* 3 We recommend: 3M PP2500 for laser printers or equivalent
Note: Do not use any paper which has been creased, wrinkled or has absorbed any
moisture.
Loading paper in paper cassette
Before you load paper, note the following:
• After you loaded paper in paper cassette, you need to “tell” your machine which
paper size, letter—-, legal—- or half letter—-sized, you loaded.
You can do this by the “Setting of the paper size” operation. (See next page.)
Note: If you will be using letter—-sized paper, there’s no need to adjust the cas-
sette; your machine is initially set for Letter—-sized paper. Simply attach
the LTR sticker to the outside of the paper cassette.
1
Open the paper cassette from the front of your machine by gently pulling it
toward you.
** Tel Mode **
Volume:
J
J J
J
J J J
J
1.8
Getting started