imagistics DL170, Operating Manual

Page: 93 / 157

Advanced features
5
Press until “Communication” appears.
6
Press
ENTER
. The
LCD
now shows either:
or
7
Use the numeric keypad to enter up to 230 fax numbers — you can use any
combination of call groups, one-touch keys, speed-dial numbers and manu-
ally-dialed numbers.
Important: Do not press
ENTER
.
Press
BROADCAST
to enter a comma between each number or call group.
Important: Do not insert a comma after the last number.
To enter a speed-dial number, press
SPEED DIAL
/
TEL INDEX
and the number’s
three-digit identifier.
To enter a call group, press
GROUP DIAL
and the group’s identifier number.
Your display can show only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or to scroll to the right.
8
If you want the broadcast to begin immediately every time you press the key,
press
ENTER
and skip to step 11.
If you want to delay the broadcast, press
ADVANCED FUNCTIONS
,
ENTER
.
9
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM
on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM
today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
10
Press
ENTER
,
ENTER
.
11
The
LCD
asks if you want to make additional settings for this programmable
one-touch number.
If you do not want to make additional settings, press
ENTER
. Then skip to step
23.
If you do want to make additional settings, press
and
ENTER
.
12
The
LCD
asks which resolution you want to use for this programmable one-
touch number.
13
Press until the mode you want appears.
Note: For any of the following settings, choose “-----” if you want to use the
default value for this programmable one-touch key.
14
Press
ENTER
. The
LCD
asks you to select a contrast mode for each programma-
ble one-touch number.
15
Press until the mode you want appears.
16
Press
ENTER
. The
LCD
asks you for the type of confirmation report you want to
set for this programmable one-touch number.
17
Press until the report you want appears.
Report :---
/ /Enter
Contrast :-------
/ /Enter
Resolution :------
/ /Enter
Option :Off
/ /Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
P2:Fax#/Advan.Func.
G5,G7,[01],S006,9-55
P2:Fax#/Advan.Func.
9-5558743_ P2:Fax#/Advan.Func.
_
Type :Communication
/ /Enter
3.39