imagistics DL170, Operating Manual

Page: 38 / 157

2.6
Basic operation
12
At the end of the operation, your fax machine beeps and displays:
Important: Whenever you transmit a document, what actually appears on
the top line of the display depends on information stored in the
remote fax. The line may even be blank.
Note: If the call fails, see “Redialing,” page 2.7.
Sending a fax using
MONITOR
/
CALL
key or a handset
You also can fax a document using either the monitor speaker or the optional
handset to dial the call.
Note: In this function, you cannot send a fax using the
FBS
glass.
1
Insert the document to the
ADF
.
2
Adjust resolution and contrast if necessary.
3
Obtain a dial tone, either by:
• Pressing
MONITOR
/
CALL
… or …
• Lifting the optional handset.
In either case, the
LCD
shows:
4
Enter the fax number by using the numeric keypad.
Also, enter access codes with the number, just as for a regular phone call.
5
When you hear fax tones from the remote unit, press
START
.
Note: If a person answers the phone, use the optional handset to tell that
person that you’re trying to send a fax. When you hear fax tones,
press
START
.
6
If you’re using an optional handset, hang up after pressing
START
.
7
At the end of the operation, your fax machine beeps and displays:
Note: If the call fails and you used
MONITOR
/
CALL
to dial, press
MONITOR
/
CALL
to hang up. Or if you’ve pressed
START
to begin the fax
transmission, press
STOP
to end it.
Also see “Redialing manually,” next page, if the call fails.
919725552009
** Complete **
** Tel Mode **
919725552009_
** Tel Mode **
_
919725552009
** Complete **