Ikegami FA-97, Operation Manual

Page: 67 / 156

3.4 Monitor Connection
HDK-97C 1303 VER1 (U)
51
INS
T
ALL
A
T
IO
N
and CO
NNE
C
T
IO
N
3
3.4 Monitor Connection
This section explains how to connect the HDK-97C to the monitor.
Connecting Camera and Monitor
There are three connectors on the rear of the camera to output various video signals. The type of video signal output from each
connector is different. Be sure to connect to a correct connector via a coaxial cable in accordance with the monitor to be used.
- Q-TV/GL, MON OUT connector : Selection between Q-TV/GL and MON OUT is made by the Q-TV/GL, MON OUT SELECT
switch.
If Q-TV/GL is selected, this connector outputs the Q-TV OUT/VBS signal when the camera is
connected to the CCU, or it inputs an external synchronization signal (GENLOCK) when the
camera is used stand-alone.
When MON is selected, this becomes the monitor output of the camera images, and the same
image signals are output as the view fi nder.
- SDI OUT connector : Outputs the digital serial video signal. Applicable to the HDTV SDI signal (not applicable to
the SDTV SDI signal).
- MON SDI connector
: Outputs the digital serial video signal. Applicable to the HDTV SDI signal (not applicable to
the SDTV SDI signal).
MIC-1 MIC-2
+48V
AB+12V
OFF
MON SDI
SDI OUT
DC OUT
EARPHONE
REM
DC IN
I/O
Q-TV/GL
㪠㪥㪚㪦㪤 㪠㪥㪚㪦㪤 㪈 㪉
FA-97
Camera rear view
Coaxial cable
Coaxial cable
MON SDI connector
MON OUT
connector
HD SDI OUT
connector
75 Ω termination
VIDEO IN
connector
HD B/W monitor
Via 5CFB coaxial cable
with a maximum length of 100m
VIDEO IN connector
SDI-capable HD
color monitor
75 Ω termination
SDI-capable
HD color monitor
VIDEO IN
connector