Ikegami FA-97, Operation Manual

Page: 21 / 156

HDK-97C 1303 VER1 (U)
5
OUTL
INE
1
1.1 Features of This Product
Reference:
Refer to "6. TROUBLE
SHOOTING and
MAINTENANCE", "Initializing
the Settings of this Product"
(page 107) for the ENGINEER
SET FILE and FACTORY SET
FILE.
Peripheral Equipment to Support a Wide Range of Purpo s e s
■ SE-H700 System Expander
By using an SE-H700 system expander, you can use a 9-inch view fi nder and full studio
lenses. The light weight portable camera is converted into a full facility studio camera.
Equipped with Variou s Interface s
- The camera includes HD-SDI signal output.
- The camera has an interface for return video in HD-SDI signal form. (RET HD-SDI signal
transmission)
- When the camera is connected to the CCU-970, you can use the data trunk channel (RS-422)
for virtual studio applications.
- An 8-core composite fi ber optic camera cable (two single-mold fi bers, four power
leads, two control signal leads) connects between the camera and the CCU-970, and the
transmission complies with BTA S-004A (Japan standard) and SMPTE292M (International
standard). The distance of signal transmission and power supply allows up to 2,000 m
by multiple connections (up to 12 connections) of composite
fi ber optic cables (9.2 mm
diameter).
- DC12V can be supplied from the camera.
Support Function for Data Setup
The level adjustment and settings of each menu for the camera can be easily set up by
calling up the ENGINEER SET FILE that is set by user engineer or the FACTORY SET
FILE that is set at shipment according to environment or shooting conditions where the
camera system is used. This enables to initialize the camera status quickly even though the
settings are changed due to causes such as wrong operation of the menu.