Ikegami FA-97, Operation Manual

Page: 11 / 156

SAFETY PRECAUTIONS
HDK-97C 1303 VER1 (U)
vii
Regarding the Fiber Connector and the Fiber Optic Cable
Take care for the following:
- When disconnecting the
fi ber optic cable from the camera or from the CCU/BS, always hold the
fi ber connector (plug) and not the cable.
- Do not crush the cable.
- Since there can be various obstacles (such as a corner of a building, glass, rough ground surface)
in places where the cable is connected, do not drag the cable without winding.
- Turn off the power before removing the fi ber optic cable.
- The allowable radius of curvature of fi ber optic cables is approximately six times of the outer
diameter of cables (approx. 60 mm for a φ 9.2mm-wide cable). Do not force to wind less than
speci fi ed. Forcible winding can break fi ber leads within the cable.
Fiber Optic Cable
Radius
Approx. 60mm
- When connecting a fi ber optic cable to a fi ber connector, anchor the fi ber optic cable with a cable
clamp.
RET-2 RET-1
/MIC BREAKER
Optical Fiber Cable
CAMERA CABLE Clamp
CAMERA CABLE Clamp
(optional)