Ikegami FA-97, Operation Manual

Page: 112 / 156

5.2 Settings from the Menu
96
HDK-97C 1303 VER1 (U)
E4
Turn the rotary pulse switch to position the cursor
on "FILE SET", and press the SET button.
The cursor moves to the mode selection column.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
E④
Position the cursor on
"FILE SET" and confirm.
E5
Turn the rotary pulse switch to position the cursor
on "MANUAL", and press the SET button.
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
E⑤
Position the cursor on
"MANUAL" and confirm.
E6
Turn the rotary pulse switch to position the cursor
on the AUTO SEL NAME display part, and press
the SET button.
The item changes to "MODEL", and the letters
"CANCEL"
fl ash.
Reference:
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＣＡＮＣＥＬ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
E⑥
Position the cursor on
the AUTO SEL NAME
display part and confirm.
The letters "CANCEL"
flash.
If "AUTO SEL NAME" is not set, the AUTO SEL NAME display part does not display the lens model name.
Connect the target lens, perform "AUTO READ", and then follow the procedures below.
Refer to Steps M1 and M2 for performing "AUTO READ".
E7
Turn the rotary pulse switch to switch the cursor
from "CANCEL" to "EDIT", and press the SET
button.
The under submenu "AUTO SEL NAME EDIT" is
displayed.
▲
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
▲
ＮＵＭＢＥＲ ＮＯ．５
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＥＤＩＴ
ＥＸＴＥＮＤＥＲ ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＭＡＮＵＡＬ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
E⑦
Switch the cursor to
"EDIT" and press confirm.
(Part for displaying the
lens name to be edited)
Displays the lens model
name to be edited.
(Connected lens name
display part)
Displays the model name
of the lens currently
connected.
E8
Turn the rotary pulse switch to position the cursor
on the part for displaying the lens name to be
edited, and press the SET button.
The item changes to the edit mode and ( ) at both ends
fl ash.
▲
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
E⑧
Position the cursor on
the part for displaying
the lens name to be
edited and confirm.