Ikegami FA-97, Operation Manual

Page: 115 / 156

5.2 Settings from the Menu
HDK-97C 1303 VER1 (U)
99
C
A
ME
R
A
SE
T
T
INGS an
d AD
JUS
T
ME
NT
5
■
Storing the camera setting state on the memory card
Store the camera setting state on the memory card. First con fi rm that the write protect switch of the memory card is not on the
LOCK side.
1
Turn the rotary pulse switch on MENU (2/3),
set
the cursor to [MEMORY CARD] and press the SET
button.
The submenu is displayed.
ＳＡＶＥ ＦＩＬＥ
ＬＯＡＤ ＦＩＬＥ
ＭＥＭＯＲＹ ＣＡＲＤ
▲
ＡＬＬ ＤＡＴＡ
ＳＮＡＰ ＳＨＯＴ
ＳＣＥＮＥ
ＲＥＦＥＲＥＮＣＥ
ＬＥＮＳ
ＭＥＮＵ ＤＡＴＡ
ＳＡＶＥ ＦＩＬＥ
▲
ＡＬＬ ＤＡＴＡ ＡＢＣＤＥＦＧＨ .ＣＤＦ
ＳＮＡＰ ＳＨＯＴ
ＳＣＥＮＥ
ＲＥＦＥＲＥＮＣＥ
ＬＥＮＳ
ＭＥＮＵ ＤＡＴＡ
ＳＡＶＥ ＦＩＬＥ
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
▲
2
Select [SAVE FILE] and press the SET button.
The SAVE FILE submenu is displayed.
3
Select the item from the SAVE FILE submenu
that you wish to save.
Select ALL DATA on the picture.
4
After selecting the item you wish to save, press
the SET button. Then use the rotary pulse switch
and SET button to insert an eight-character file
name.
When the eight character file name has been
determined, [PUSH SET -> START] is displayed
on the cursor.
Press the SET button.If a file of the same file
name exists on the memory card at this time,
proceed to step M1. If you wish to cancel, turn the
rotary pulse switch when [PUSH SET -> START]
is displayed.
5
When the file is being saved, [SAVING FILE] is displayed. 㩷
If the file is saved normally, [COMPLETE] is displayed.
CAUTION:
Never remove the memory card from the slot during display of [SAVING FILE] or while the access indicator is lighted, as
data is being written to the memory card. Removing it at this time could damage the memory card data or the memory card
itself.