Ikegami FA-97, Operation Manual

Page: 109 / 156

5.2 Settings from the Menu
HDK-97C 1303 VER1 (U)
93
C
A
ME
R
A
SE
T
T
INGS an
d AD
JUS
T
ME
NT
5
3
On MENU (3/4), turn the rotary pulse switch
to position the cursor on "LENS SELECT," and
press the SET button.
The submenu is displayed.
ＳＣＡＮ ＦＯＲＭＡＴ ＳＥＬＥＣＴ
ＣＰＵ ＳＹＳＴＥＭ ＣＯＮＴＲＯＬ
ＡＵＴＯ ＩＲＩＳ ＳＥＴ
ＡＵＴＯ ＳＥＴＵＰ ＭＯＤＥ
ＬＥＮＳ ＳＥＬＥＣＴ
ＬＥＶＥＬ ＡＤＪＵＳＴ
ＰＲＯＣＥＳＳ ＭＯＤＥ
ＣＵＳＴＯＭ ＧＡＭＭＡ ＤＡＴＡ
ＰＲＥＳＥＴ ＦＩＬＥ ＬＯＡＤ
＊＊＊ ＭＥＮＵ （３／３） ＊＊＊
▲
▲
▲
③
Position the flashing
cursor on "LENS
SELECT" and confirm.
4
Set "NUMBER", "NAME" and "EXTENDER".
Refer to the explanation of corresponding item for
how to set each data.
NO. 1 is selected here as an example.
CAUTION:
If a new fi le is created with the same fi le number as an existing fi le, the data will be overwritten and the old data will be lost.
5
Turn the rotary pulse switch to position the cursor
on "FILE SET," and press the SET button.
The cursor moves to the mode selection column.
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＮＯ．１
ＰＵＳＨ ＳＥＴ→ＳＴＡＲＴ
ＮＵＭＢＥＲ ＮＯ．１
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＯＦＦ
ＡＵＴＯ ＳＥＬ ＯＦＦ
ＦＩＬＥ ＳＥＴ ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ＊＊＊
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ ＯＦＦ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ ＯＦＦ
ＬＥＮＳ ＳＥＬＥＣＴ
▲
⑤
Position the cursor on
"FILE SET" and
confirm.
⑥
Select the set value
and confirm.
⑦
Either message is
displayed or flashes.
6
Turn the rotary pulse switch to select the set
value, and press the SET button.
The value is con fi rmed, and either of the following
messages is displayed at the bottom of the screen:
- LENS No. x : Displayed when "MANUAL"
is selected.
- PUSH SET -> START : Displayed and fl ashes when
"AUTO" is selected.
Go to Step 7 when "AUTO" is selected.
When "MANUAL" is selected, go to Step M1 to
obtain the model name of the lens after lens
fi le items
such as GAIN/FLARE/GAMMA are adjusted by
MCP, etc.
7
Press the SET button.
The lens fi le is created.
8
Set the S11-4 DIP switch of the MPU module back to "OFF."
Note:
- When the camera is powered OFF, the FILE SET settings are turned OFF.
- Before creating lens
fi les, prepare all the lenses to use. Then, create the fi les under the same condition at a time. If the conditions are
changed, the setting cannot be accurate. Lens fi les memorize a difference in level between lenses. If the lighting or chart is changed, it
cannot tell whether it is the lighting error, chart error, or lens error.