Ikegami FA-97, Operation Manual

Page: 102 / 156

5.2 Settings from the Menu
86
HDK-97C 1303 VER1 (U)
Menu Item
Initial
s etting
Setting value De s cription, Remark s
MENU DATA
ALL VF
VF DTL
Adjusts the overlap amount of the VF image focusing edge
signal (VF DTL).
BOOST FREQ
10MHz
10MHz,15MHz,
18MHz,18MHzWIDE
Selects the frequency to be boosted.
NOISE SUP
0 0
to
10 Sets the removal level of the noise signal.
MIC GAIN CONTROL
MIC1 STEP
-40dB
+4dB, 0dB, -10dB,
-20dB, -30dB, -40dB,
-50dB, -60dB
The MIC1 gain is changed step by step. -
MIC1 FINE
0 -100
to
100
Fine adjustment of the MIC1 gain. The gain decreases about -8
dB with -100, and increases about +8 dB with +100.
-
MIC2 STEP
-40dB
+4dB, 0dB, -10dB,
-20dB, -30dB, -40dB,
-50dB, -60dB
The MIC2 gain is changed stepwise. -
MIC2 FINE
0 -100
to
100
Fine adjustment of the MIC2 gain. The gain decreases about -8
dB with -100, and increases about +8 dB with +100.
-
RETURN SELECT MODE
RET-2/MIC SEL
RET-2 RET-2, MIC
Allocates a function to the RET-2/MIC button on top of handle
and on left side of camera.
-
VTR SW SEL
RET-2 RET-2, MIC Allocates a function to the VTR SW button on lens. -
RET PRIORITY
NOTHING
NOTHING,
RET-2, RET-1
If a RET-1 or RET-2 image is not displayed in the view fi nder,
sets the output signal to MON SDI (during RETURN setting).
NOTHING
：
Sets to RET image last displayed in VF.
RET1
：
Sets to RET-1 image.
RET2
：
Sets to RET-2 image.
-
FILTER SERVO MODE
SERVO CONT
SERVO SERVO ,MANUAL
SERVO
：
Sets to automatic control.
MANUAL
：
Sets to manual control.
-
VF MODE
COLOR VF
AUTO AUTO, ON
AUTO : Automatically recognizes the color VF to convert the
VF VIDEO signal to R/G/B output.
ON : Makes the VF VIDEO signal output R/G/B.
-
FRONT TALLY
ENABLE ENABLE, DISABLE Sets active/inactive for VF FRONT TALLY. -
SW FUNCTION
RET-1 ( HANDLE )
RET-1
RET-1, ZOOM-,
FOCUS-, NONE
Sets the button control of RET-1 and RET-2/MIC on the top of
the handle.
When assigning to ZOOM, FOCUS, a serial lens is required.
-
RET-2 ( HANDLE )
RET-2
RET-2, ZOOM+, FOCUS+,
NONE
-
ZOOM SPEED
15 0
to
100
Sets the operational speed of ZOOM, FOCUS control. The
speed is slower for "0" and faster for "100".
-
FOCUS SPEED
15 0
to
100 -
INFORMATION
MPU MODULE SW
(information
display)
Displays the DIP switch settings of the MPU module. - -
WORKING TIME
**.*H
Displays the total accumulated operation time of the camera up
to the present.
- -
SUB TIME
**.*H, RESET
Displays the camera's calculated operation time.
Differs from WORKING TIME because it can be reset by the
user.
- -
ROM NO.
STR-****-V**.**.**
ROM NO. displays the ROM version (STR-4895V**) of the
MPU-A module.
- -
CHECK SUM
CHECK SUM displays the ROM data check sum. - -