Ikegami FA-97, Operation Manual

Page: 83 / 156

4.6 Auto Setup
HDK-97C 1303 VER1 (U)
67
OP
E
R
A
T
ION
4
■
Auto Setup Screen
When various auto setup functions execute, the execution status is displayed in the view fi nder or on the PM. A currently executing
item is indicated by the cursor.
When auto setup successfully completes, "OK" appears beside "Judgement". When it fails, "NG" appears beside "Judgement" with
the cursor on the failed item.
*** AUTO SETUP MONITOR *** [HDK-97C]
Function: AUTO BLACK SHADING
Mode: Lens No.1
Chart: EXT.
Judgement: Setting Position: H V
Gain R G B R G B W-Shading Saw
Ganma R G B R G B W-Shading Para
Flare R G B R G B B-Shading Saw
Pedestal R G B R G B B-Shading Para
Black Set R G B B-Shading Peak
Iris CNTRL
White Clip R G B SERCH Chart
Knee Slope R G B
Knee Point R G B
Auto Knee Slope R G B
Auto Knee Point R G B
Skin Hue
R G B
R G B
[Auto Setup Monitor Execution Display Screen]
Executing auto setup type
Setup result
Executing auto setup
Auto setup item
FULL Auto Setup and LEVEL Auto Setup
The FULL auto setup and LEVEL auto setup can be activated from the camera menu, OCP, or MCP. This section explains how to
activate from the camera menu.
1
Shoot an external auto setup chart.
Make sure that the chart is aligned with the camera horizontally and vertically. Also, be sure to provide even light on the
whole chart.
2
Use the CC FILTER switch and ND FILTER switch on the right side of the camera to set the optical filter which
suits the light source.
If the operational priority for the fi lter is not given to the camera, press the FILTER HEAD switch to switch the
operational priority to the camera. When the priority is given to the camera, an asterisk (*) is displayed in the view fi nder.
3
Select and activate "FULL" or "LEVEL" from the camera menu "AUTO SETUP MODE" - "AUTO SETUP".
Note:
To perform the FULL/LEVEL auto setup from an OCP or MCP, perform the following steps.
- Press the SETUP button in the function switch part.
- Press the AUTO SETUP button on the LCD.
- Press the Full or Level button on the LCD.
- Press the Start button on the LCD.