Ikegami FA-97, Operation Manual

Page: 87 / 156

4.6 Auto Setup
HDK-97C 1303 VER1 (U)
71
OP
E
R
A
T
ION
4
Auto Black Shading
This section explains how to activate auto black shading.
1
Set the AWB/ABB switch to ABB and hold it in
this position.
The lens iris is automatically closed, and auto black
balance is activated. After completion of auto black
balance, black shading starts automatically. You may
release your
fi nger from the AWB/ABB switch when
the view fi nder screen display changes to "A.BLK
SHADE BLACK SHADE".
①
Set the AWB/ABB switch
to ABB and hold it in this
position.
2
Check the result.
Upon completion of auto black shading, "OK" or
"NG" appears on the view
fi nder screen.
Note:
- If auto black balance results in "NG", auto black
shading is discontinued.
- To discontinue auto black shading, set the AWB/ABB
switch to ABB again before the result is displayed.
The adjusted setting is cleared, returning to the
former status before auto black shading.
- To activate the auto black shading from an OCP, press
the ABB button in the camera function operation
part.
- To activate it from an MCP, press the Quick button on
the LCD, then press the ABB button.
ＡＢＢ
ＢＬＫ ＳＥＴ
Ａ.ＢＬＫ ＳＨＡＤＥ
ＢＬＡＣＫ ＳＨＡＤＥ
Ａ.ＢＬＫ ＳＥＴ
Ｏ Ｋ