Ikegami FA-97, Operation Manual

Page: 69 / 156

3.5 BS Connection
HDK-97C 1303 VER1 (U)
53
INS
T
ALL
A
T
IO
N
and CO
NNE
C
T
IO
N
3
■
Removing the Fiber Cable
This section explains how to remove the fi ber cable.
CAUTION:
When you remove the cable, be sure to hold the plug and pull. Failure to do so may damage the fi ber in the cable.
●
Camera
㪠㪥㪚㪦㪤 㪠㪥㪚㪦㪤 㪈 㪉
Camera rear view
CAMERA connector
(male)
Unlocking ring
Plug (female)
Fiber cable
●
CCU
CCU-970 rear view
CAMERA connector (female)
Unlocking ring
Plug (male)
Fiber cable
1
Remove the cable from the camera while pulling the unlocking ring on the fiber cable plug (female) toward you.
If the connector tip is locked, the fi ber cable will not be removed. If it is locked, push the fi ber cable toward the CAMERA
connector, and then remove as described above.
2
Remove the cable from the CCU-970 while pushing the unlocking ring of the CAMERA connector on the rear of
CCU-970.
If the connector tip is locked, the fi ber cable will not be removed. If it is locked, push the fi ber cable toward the CAMERA
connector, and then remove as described above.