Ikegami FA-97, Operation Manual

Page: 93 / 156

5.1 Settings Using Switches on the Camera
HDK-97C 1303 VER1 (U)
77
C
A
ME
R
A
SE
T
T
INGS an
d AD
JUS
T
ME
NT
5
1
Select "1" or "2" from MENU (1/3) "VF DISPLAY" - "DISPLAY MODE."
Characters appear in the view fi nder.
Reference:
Refer to "5.2 Settings from the Menu", "Menu Con fi guration and content" (page 85) for how to display characters in the
view fi nder.
2
Set the SHUTT/SUP-V switch on the right side of the camera to SET.
One of the following modes is displayed:
- Preset shutter speed
- Variable shutter speed
- SUPER-V
Note:
Each time the SHUTT/SUP-V switch is pressed to the SET position, the mode switches in the order of preset shutter, variable
shutter and SUPER-V.
3
Select "PRESET SHUTTER SPEED" or "VARIABLE SHUTTER SPEED."
4
While the characters of the shutter speed are flashing in the viewfinder, turn the rotary pulse switch to the
appropriate shutter speed and press the SET button.
Note:
- The fl ashing stops automatically in approximately 3 seconds after the setting operation ends.
- When the characters are not fl ashing in the view fi nder, press the SET button. The characters will start fl ashing and the shutter
speed setting will be enabled.
- There are three ways to con fi rm the shutter speed:
- Press the SET button.
- Wait until the
fl ashing stops.
- Set the SHUTT/SUP-V switch to OFF. The displayed speed is maintained until the switch is set to ON. The shutter speed is
validated when the switch is set to ON.
■ To cancel the Shutter Speed
1
Set the SHUTT/SUP-V switch to OFF.