Ikegami FA-97, Operation Manual

Page: 46 / 156

2.2 Displays in the Viewfinder
30
HDK-97C 1303 VER1 (U)
① Memory backup battery voltage
The warning message is displayed for 5 seconds when the
voltage of the backup battery in the MPU module has dropped.
② Auto s etup function
Executing auto setup function is displayed.
"AWB"
"ABB"
"FULL SETUP"
"LEVEL SETUP" etc.
③ P.FUNC di s play
Function assigned to the P.FUNC switch is displayed with its
ON/OFF status
"IRIS+ CORR OFF"
"AUTO KNEE ON"
"SCENE-1 ON" etc.
④ Battery voltage
The present voltage is displayed fl ashing when the battery
voltage has dropped below the set value. Battery voltage is set
from the menu "BATTERY WARNING."
⑤ Execution re s ult of auto s etup
Execution result of auto setup (AWB and ABB, including) is
displayed.
OK : Auto setup has been completed.
NG : Auto setup was not completed.
STOP : Auto setup was discontinued.
LEVEL OVER : Input signal level is too high.
LEVEL UNDER : Input signal level is too low.
CHG FILTER : Optical fi lter is not appropriate.
⑥ Adju s tment item of auto s etup
The item to which adjustment is being made is displayed
during auto setup.
"FLARE GAMMA GAIN"
"PED"
"IRIS" etc.
⑦ Fan s tatu s
The fan status is displayed.
AUTO : Fan is in the AUTO mode.
Displayed when the VF CHAR button is pressed.
SLOW : Fan is in the SLOW mode.
Displayed when the VF CHAR button is pressed.
QUIET
:
Fan is in the QUIET mode.
Displayed when the VF CHAR button is pressed.
STOP : Fan is in the STOP mode.
Displayed when the VF CHAR button is pressed.
FAN!! : Displayed fl ashing when the fan has stopped
abnormally.
⑧ AWB color temperature
The color temperature stored in A-ch or B-ch memory
is displayed for 2 seconds when the AWB/ABB switch is
operated. (Selection between A-ch and B-ch is made by the
AWB SELECT switch.) The AWB color temperature is also
displayed when the FILTER switch is operated.
⑨ SKIN DTL ON/OFF
"SK" is displayed when the SKIN DTL function is ON.
⑩ OPT level
Optical signal level of the fi ber cable is displayed when the
CCU is connected to the camera. When the optical signal level
is normal, "OPT OK" is displayed for 2 seconds.
⑪ BARS TITLE
The bar title is displayed when the color bar is output.
⑫
GAIN UP value
The set Gain is displayed. "0dB" is displayed only when the
GAIN SELECT switch is operated.
⑬ Temperature warning
This warning is displayed when the temperature of the inside
of the camera is high.
⑭ ND and CC filter number s
ND
1 2 3 4 5
CAP 100% 25% 6.2% 1.6%
CC
A B C D E
CROSS 3200K 4300K 6300K 8000K
⑮ Operational priority for filter control
"*" is displayed when the camera has the operational priority
for the
fi lter control.
⑯ AWB memory channel
The memory selected by the AWB SELECT switch is
displayed.
A : A-ch memory
B : B-ch memory
O : White balance adjustment is in the preset condition
(3200K).
⑰ Shutter s peed/focu s indicator/zoom indicator
The shutter speed or focus, zoom position is displayed.
⑱
Return video input channel
Input channel for return video is displayed.
RET-1 : Return video 1 is selected.
RET-2 : Return video 2 is selected.
RET-3 : Return video 3 is selected.
RET-4 : Return video 4 is selected.
⑲
INCOM MIC (USA ver s ion)
This is displayed when "MIC" is selected using the RET-2/MIC
button.