Ikegami FA-97, Operation Manual

Page: 68 / 156

3.5 BS Connection
52
HDK-97C 1303 VER1 (U)
3.5 CCU Connection
This section explains how to connect the HDK-97C to the CCU. CCU-970 is used here as an example.
Two types of
fi ber cables are available in different shapes.
- Fiber cable (2-core single mode) : Diameter 9.2mm or 16mm, Maximum length 3000m (when CCU-970 is used)
Connecting Camera and CCU
㪠㪥㪚㪦㪤 㪠㪥㪚㪦㪤
㪈 㪉
FA-97
Camera rear view
CAMERA connector
Fiber cable
CCU-970 rear view
CAMERA connector
1
Connect the CAMERA connector on the rear of the CCU-970 to the CAMERA connector on the rear of the
camera via a fiber cable.
CAUTION:
- The fi ber cable has a male plug connector on one end and a female plug connector on the other end. Be sure to connect the
female plug connector to the camera and the male plug connector to the CCU.
- Secure the fi ber cable with the CAMERA CABLE clamp on the left side of the camera to remove any slack. Refer to
"SAFETY PRECAUTIONS" described at the beginning of this manual for how to secure the cable with the cable clamp and
how to handle the
fi ber cable.