background image

 

Before you use this Product 

 

This Zavio product has been designed with safety in mind. However, if not used properly electrical products can 

cause fires which may lead to serious body injury. To avoid such accidents, be sure to heed the following. 

Legal Caution 

Video and audio surveillance can be forbidden by laws that vary from country to country. Check the laws in your 

local region before using this product for surveillance purposes.   

Heed the safety precautions 

Be sure to follow the general safety precautions and the “Operation Notice.” 

In case of a breakdown 

In case of system breakdown, discontinue use and contact your authorized Zavio dealer. 

In case of abnormal operation 

• If the unit emits smoke or an unusual smell,   

• If water or other foreign objects enter the cabinet, or 

• If you drop the unit or damage the cabinet: 

1 Disconnect the cable and the connecting cables. 

2 Contact your authorized Zavio dealer or the store where you purchased the product. 

Operation Notice - Operating or storage location 

Avoid operating or storing the camera in the following locations: 

• Extremely hot or cold places (Operating temperature: 0 °C to +50 °C [32 °F to 122°F]) 

• Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters) 

• Close to sources of strong magnetism   

• Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters   

• Locations subject to strong vibration or shock 

Ventilation 

To prevent heat buildup, do not block air circulation around the device. 

Transportation 

When transporting the camera, repack it as originally packed at the factory or in materials of equal quality. 

Cleaning 

• Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be removed using a soft 

cloth dampened with a small quantity of detergent solution, then wipe dry. 

• Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the surface. 

 

Summary of Contents for F611E











































Reviews: