4.7 Motion Detection
When you click
Motion Detection
on the Advance mode menu, the Motion Detection setting
menu appears. There are three Motion Detection functions as sensors to set for different
detecting zones. Each one has Threshold and Sensitivity inputs which you can adjust to
specific zone sequentially. Motion Detection function can support to FTP, SMTP and Alarm
output for capturing and sending images or starting alarm output.
Click it
On
when you use the Motion Detection function and detecting zone appears for
adjusting and moving. The common setting options are displayed below. If you do not wish to
use the Motion Detection function, click it
Off
and press
OK
.
Motion Detection 1
：
Click it on for using
Motion Detection 1
function as a sensor. You can
adjust and move the detecting zone by using mouse.
Motion Detection 2
：
Click it on for using
Motion Detection 2
function as a sensor. You can
adjust and move the detecting zone by using mouse.
Motion Detection 3
：
Click it on for using
Motion Detection 3
function as a sensor. You can
adjust and move the detecting zone by using mouse.
Threshold
：
You can use the tool bar to set up-limit value. When detecting zone signals are
over setting value, it would carry on assigned work.
37
