![background image](http://html2.mh-extra.com/html/zavio/f611e/f611e_user-manual_3242677012.webp)
NTP server name
:
Type the host name or IP address of the NTP server, up to 64 characters.
Time zone
:
Select the time zone and time difference from Greenwich Mean Time in the area
where the device is installed from the pulldown box.
3.1.3 Initialize
Reboot
:
Click this button to reboot the device. A confirmation dialogue will appear. Click O
K
to proceed. It takes about two minutes to reboot the device.
Factory default
:
Click this button to reset the device to the factory default settings. A
confirmation dialogue will appear. Click O
K
to proceed, the network indicator on the device
will start to blink. After completing adjustments to the default settings, the device will reboot
automatically. Do not turn off the device until the device reboots.
Backup setting data
:
Save the setting data of the device to a file. Click
Save
, and follow the
instructions on the browser to save the setting data file to your specified location.
Restore setting
:
Load the saved setting data of the device. Click
Browse
and select the file in
which the setting data is stored. Click
OK
, and the device is adjusted according to the loaded
data and restarted.
Firmware update
:
Upgrade the device software. Click
Browse
and select the file for
upgrading. A confirmation dialogue will appear. Click
OK
to start upgrading. The device will
reboot upon completion.
Note:
• Use only upgrade files that are special for this device. Problems may occur otherwise.
• Do not turn off the device power or disconnect the network until the upgrading is
completed.
10