3.3 Network
The Network Camera default account and password setting is “admin/admin”. That means
everyone might access the Network Camera including the configuration as long as the IP
address is known. It is necessary to assign a password if the Network Camera is intended to
be accessed by others.
Use this menu to set the user names and passwords of Administrator
and up to 9 different users (User 1 to User 9), and the access right of each user.
3.3.1
Information
MAC address
:
Display the MAC address of the device.
Obtain an IP address automatically (DHCP)
:
If a DHCP server is installed on the network, to
select this while the IP address is assigned by the DHCP server.
Note
:
• When you set
Obtain an IP address automatically (DHCP)
, make sure that the DHCP
server is working on the network.
Use the following IP address
:
Select this when a fixed IP address is set.
IP address
:
Enter the IP address of the device.
Subnet mask
:
Enter the subnet mask.
Default gateway
:
Enter the default gateway.
Use the following DNS server address
:
Select this when you set the fixed address as the IP
address of DNS server.
15