![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210103.webp)
SmartPLC DataLine with EtherNet/IP device interface
103
6
Setup
Content
Connect the device to the periphery .....................................................................................................103
Start screen 'Basic settings' ..................................................................................................................104
Update the firmware of the device ........................................................................................................106
Connect and address AS-i slaves ........................................................................................................110
Setup of EtherNet/IP .............................................................................................................................110
Set Ethernet configuration interfaces ...................................................................................................111
Exchange AS-i slave ............................................................................................................................111
41644
This section provides information for setting up the device following mounting, electrical installation
and connection to AS-i network components.
Observe the notes on mounting and electrical connection of the device!
→ Operating instructions (supplied with the device)
>
6.1
Connect the device to the periphery
41574
>
6.1.1
EtherNet/IP interface
41494
To connect the device to a EtherNet/IP network:
►
Integrate the device into the EtherNet/IP network via the X6 and/or X7 EtherNet ports according to the requested
topology.
Details →
Interfaces
(→ S.
>
6.1.2
Ethernet configuration interfaces
42952
To access the web interface or the programming interface of the device-internal PLC of the device:
►
Connect the device to the Ethernet network or the PC/laptop via the configuration interface 1 (X3) or 2 (X8)
(→
Configuration interfaces: Connection concepts
(→ S.
If AC1423/24 is to be operated as EtherCAT master:
►
Connect the device to the EtherCAT network via the configuration interface 1 (X3) or 2 (X8).