![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210068.webp)
SmartPLC DataLine with EtherNet/IP device interface
68
>
5.5.3
System: Setup
41670
The [Setup] menu item provides access to the configuration options of the system.
>
Set the output access
41645
To set the control instance for the outputs of the AS-i slaves:
1 Select the menu page
►
>
►
Select [System settings] tab.
2 Configure the control instance for the outputs of the AS-i slaves
►
Set the following parameters as required:
Name
Description
Possible values
[Output access]
Control instance of the AS-i
slave outputs
[Gateway]
A higher-level PLC controls the outputs of the
AS-i slaves.
[Manual]
The operator controls the outputs of the AS-i slaves
via the graphical user interface.
[PLC]
The device-internal PLC controls the outputs of the
AS-i slaves.
3 Save the changes
►
Press [Accept selection] to save the changes.
>
The selected instance controls the outputs of the AS-i slaves.
If the value
PLC
is selected, the system will automatically enable the device-internal PLC
(
→
Enable/Disable the device-internal PLC
(