![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210078.webp)
SmartPLC DataLine with EtherNet/IP device interface
78
>
Export device configuration
41515
NOTICE!
During the export the control functions of the device are not available.
>
Risk of undesired system behaviour
► Do not export the device configuration during operation of the plant!
NOTICE!
An interruption of the export can lead to a faulty export file.
>
Risk of data loss
► Do not disconnect the device during the export.
► Only start the export after the boot application has been successfully generated.
► Do not remove the SD card from the device before the export is completed.
The SD card has to be formatted with the FAT32 file system. SD cards with other file systems
are not recognised by the AC1423/24.
To allow identification of the saved configuration the export file is saved using the following name
convention:
ifm_DevID_xxxxxxxxxxxx_YYYYMMDDhhmmss.iconf
DevID
Article number of the device
xxxxxxxxxxxx
Serial number of the device
YYYYMMDDhhmmss
Timestamp of the saved file
(YYYY = year, MM = month, DD = day, hh = hours, mm = minutes, ss = seconds)
To save the current device configuration on an SD card:
1 Select menu page
►
>
>
Select [Configuration] tab.
2 Save the device configuration
►
Insert an empty, formatted SD card in the SD card slot of the device.
►
Activate the [Export configuration] button.
>
The device saves the current configuration on the SD card. The device stores the current configuration on the SD
card.