![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210168.webp)
SmartPLC DataLine with EtherNet/IP device interface
168
>
Slot 9 – Analogue input data
41699
Slot
Description
Value range
Length
[words]
9
Data area with a maximum
length of 60 words for cyclic
transmission of analogue
input information
Default setting: analogue
inputs of AS-i slaves
01 ... 15, connected to AS-i
master 1
The
valid
and
overflow
flags that each
analogue AS-i input slave
provides for each channel
are NOT represented here. If
required, they can be read
out via the acyclic services.
(
→
Acyclic data
(
Empty module = Module is deactivated
0
004 words = Module is activated with 4 words
4
008 words = Module is activated with 8 words
8
012 words = Module is activated with 12words
12
016 words = Module is activated with 16 words
16
020 words = Module is activated with 20 words
20
024 words = Module is activated with 24 words
24
028 words = Module is activated with 28 words
28
032 words = Module is activated with 32 words
32
036 words = Module is activated with 36 words
36
040 words = Module is activated with 40 words
40
044 words = Module is activated with 44 words
44
048 words = Module is activated with 48 words
48
052 words = Module is activated with 52 words
52
056 words = Module is activated with 56 words
56
060 words = Module is activated with 60 words
60
The exact mapping of analogue input data within this area depends on the parameter setting [Analog.
channels/I-slave] (
→
Configuration of the analogue channels in slots 9 ... 12
(