SmartPLC DataLine with EtherNet/IP device interface
79
>
Import device configuration
41489
NOTICE!
During the import the control functions of the device are not available. During the import the
device reboots.
>
Risk of undesired system behaviour
► Do not import the device configuration during operation of the plant!
NOTICE!
An interruption of the import can lead to a faulty device configuration.
>
Risk of data loss
► Do not disconnect the device during the import.
► Do not remove the SD card from the device before the import is completed.
To avoid that a wrong device configuration is restored:
► Check before the import if the required device configuration is saved on the SD card
(identification of the saved device configuration:
→
Export device configuration
(
► Save only the device configuration to be imported in the root directory of the SD card.
To transfer a stored device configuration to the device:
1 Reboot the device
►
Insert the SD card containing the stored device configuration into the SD card slot.
►
Disconnect and the device from the power supply and reconnect it to the power supply.
>
Device reboots.
2 Select menu page
►
>
►
Select [Configuration] tab.
3 Restore the device configuration
►
Activate the [Import configuration] button.
>
A warning appears.
►
Confirm prompt with [OK].
>
The device configuration is loaded and saved onto the device.
>
The device reboots.
