SmartPLC DataLine with EtherNet/IP device interface
90
>
EtherNet/IP: Setup
41552
The [Setup] menu item provides access to the configuration options of the EtherNet/IP interface.
>
Notes on IP settings
41752
The device provides the following options for configuration of the EtherNet/IP interface:
Manual =
The operator sets the interface parameters (IP address, network mask,
gateway address) manually.
Automatic =
The interface parameters are automatically set through one of the following
protocols.
Dynamic Host Configuration Protocol (DHCP)
Bootstrap Protocol (BOOTP)
To display the current configuration method for IP parameters of the EtherNet/IP interface:
1 Select the menu page
►
>
>
►
Select [Fieldbus] tab.
2 Display the current configuration method for IP parameters
>
The [IP mode] list shows the active configuration method:
[Static] =
The operator sets the IP parameters manually.
[
DHCP]
=
The device receives the IP parameters from a DHCP server.
[BOOTP]
=
The device receives the IP parameters from a BOOTP server.
3 Display the current IP parameters of the EtherNet/IP interface
>
The following parameters show the current IP settings of the EtherNet/IP interface:
Designation
Description
[IP address]
IP address of the configuration interface
[Subnet mask]
Subnet mask of the network segment
[Gateway address]
IP address of the EtherNet gateway
