![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210104.webp)
SmartPLC DataLine with EtherNet/IP device interface
104
>
6.2
Start screen 'Basic settings'
41689
The 'Basic settings' start screen appears after the following actions/events:
initial setup
firmware update
data loss due to battery failure
The basic settings provide access to the GUI texts, system time, etc.
The same operating notes as for the page view apply for the 'Basic settings' start screen
(
→
Page view
(
>
6.2.1
Change the basic settings of the device
41597
To change the basic settings of the device:
1 Start the device
►
Connect the device to a circuit.
>
The device starts.
>
The display shows the start screen "Basic settings" (screenshot).
2 Set the language of the GUI texts
►
List shows the active language.
►
Use [
] / [
] to mark the list.
>
The focus (= orange frame) is on the marked list.
►
Open the list with the left function key [Select].
►
Use [
] / [
] to mark the desired language and press [Select] to
activate it.
>
The GUI texts appear in the selected language.
►
Go to the next page with [Next].