IFM SmartPLC DataLine AC1423, Device Manual

Page: 190 / 200

SmartPLC DataLine with EtherNet/IP device interface
190
Comm. no.
[hex]
Comm. no.
[dec]
Description Note
004A 74 CTT2 device group exchange:
device group data exchange with an AS-i salve with CTT2 profile CTT2 slave profile *)
004B 75 CTT2 device group selective read from buffer:
manufacturer-specific read / write call of an AS-i slave with CTT2 profile CTT2 slave profile *)
004C 76 CTT2 device group selective write from buffer:
device group read / write call of an AS-i slave with CTT2 profile CTT2 slave profile *)
0050 80 set AS-i master settings
0051 81 Reset the error counters
Legend:
*) ... CTT2 profiles = S-7.5.5, S-7.A.5 or S-B.A.5
CTT
→ Combined transaction – Use of analogue channels in the gateway depending on the slave profile
(
→ S.
136 )
Detailed information about the acyclic data sets and the command interface is given in the
supplement to the device manual of the SmartPLC DataLine mit
EtherNet/IP-Device-Schnittstelle (
→ Overview: User documentation for AC1423/24
(
→ S.
7 )).
>
Programmers' notes: call up acyclic services
41769
EtherNet/IP controllers use the
Message (MSG)
command to send data/commands asynchronously to
another network participant and receive its response.
For detailed information about the Message (MSG) command:
→ operating instructions of the
EtherNet/IP controller used!
>