![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210059.webp)
SmartPLC DataLine with EtherNet/IP device interface
59
>
Change the Extended ID1 of the AS-i slave
41601
To set the Extended ID1 of an AS-i slave:
1 Select the menu page
►
>
or
>
►
Select an AS-i slave (→
Slave selector
(→ S.
►
Select [Setup] tab.
2 Set the Extended ID1
>
The [ID1] list displays the current Extended ID1 value (hexadecimal format).
►
Select the desired value for Extended ID1 from the [ID1] list.
>
Selected value is applied.
After changing the Extended ID1, the existing configuration no longer corresponds to the stored
configuration:
>
An error message appears (configuration error).
► Start a projection adaptation (→
Carry out a projection adaptation
(