IFM SmartPLC DataLine AC1423, Device Manual

Page: 13 / 200

SmartPLC DataLine with EtherNet/IP device interface
13
>
3.2.5 Interfaces
36927
The device provides the following interfaces:
>
Ethernet configuration interfaces
36913
The configuration interface 1 (X3) is behind the front flap of the device.
The configuration interface 2 (X8) is underneath the EtherNet/IP interface (X6/X7).
The user can access the following functions via both interfaces:

web interface for device configuration and diagnostics

Programming of the device-internal PLC and the fail-safe PLC with CODESYS

Operation as additional fieldbus interface
Possible network topologies:
→ Configuration interfaces: Connection concepts
(
→ S.
122 )
Technical data:
→
Technical data
(
→ S.
119 )
>
EtherNet/IP fieldbus interface
36925
The device communicates with the higher-level control instance of the EtherNet/IP network via the
EtherNet/IP interface (X6/X7).

Notes regarding connetion concepts:
→ Configuration interfaces: Connection concepts
(
→ S.
122 )

Technical data:
→ Technical data
(
→ S.
119 )
>
SD card slot
36761
The SD card slot (X5) is located behind the front flap of the device. The following actions can be
performed with an SD card:

update the firmware of the device

save/restore the device configuration
Technical data:
→ Technical data
(
→ S.
119 )
>
3.2.6 Required accessories
36764
To be able to operate the device in a sensible way you need the following accessories (not supplied
with the device):

Depending on the selected voltage supply (

Operating instructions) you need:

a power supply for the 24 V power supply (e.g. art. no. DN3011)

for each AS-i master one AS-i power supply each (e.g. art. no. AC1236)

a data decoupling module AC1250 (accessory, optional)

AS-i slaves.