![background image](http://html1.mh-extra.com/html/ifm/smartplc-dataline-ac1423/smartplc-dataline-ac1423_device-manual_3954210064.webp)
SmartPLC DataLine with EtherNet/IP device interface
64
>
Control PLC applications
41577
To control all PLC applications stored on the device:
1 Select the menu page
►
>
>
►
Select [All applications] tab.
2 Display status information about the PLC applications
>
Page shows the following information:
Designation
Meaning
[Total]
Number of applications stored on the device
[Started]
Number of applications running
►
Perform one of the following actions:
– Launch all PLC applications: continue with → step 3
– Stop all PLC applications: continue with → step 4
– Reset all PLC applications: continue with → step 5
3 Launch all PLC applications
►
Press [Starten] button.
>
The confirmation prompt appears.
►
Press [OK] to confirm the prompt.
>
All PLC applications are started.
►
Continue with → step 6
4 Stop all PLC applications
►
Press [Stop] button.
>
The confirmation prompt appears
►
Press [OK] to confirm the prompt.
>
All PLC applications are stopped.
►
Continue with → step 6
5 Reset all PLC applications
►
Press [Reset] button.
>
The confirmation prompt appears.
►
Press [OK] to confirm the prompt.
>
All PLC applications are reset and stopped.
6 Display the status of the PLC applications
>
The page shows updated information about the stored PLC applications.
>
The status of the [Start], [Stop] and [Reset] buttons is updated.