![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585152.webp)
12-9
12
SET MODE
Selects the switching relay type for [RELAY] from
Lead and MOS-FET.
Select the suitable relay type when connecting a non-
Icom linear amplifier.
• Lead
: Use mechanical relay.
(16 V DC/0.5 A max.; default)
• MOS-FET : Use semiconductor type relay.
(250 V/200 mA max.)
■
ACC set mode
(continued)
Selects the desired item for an external meter indica-
tion (main readout).
• Auto
: Outputs the receiving signal strength level
during receive, and outputs the selected
level (selected with [METER]), during
transmit. (default)
• S(MAIN) : Outputs the receiving signal strength level
during receive.
• Po
: Outputs the transmitting power level dur-
ing transmit.
• SWR
: Outputs the VSWR level during transmit.
• ALC
: Outputs the ALC level during transmit.
• COMP
: Outputs the compression level during
transmit.
• V
D
: Outputs the drain terminal voltage of the
final amplifier MOS-FETs.
• I
D
: Outputs the drain current of the final am-
plifier MOS-FETs.
Selects the desired item for an external meter indica-
tion (sub readout).
• Auto
: Outputs the receiving signal strength level
during receive, and outputs the selected
level (selected with [METER]), during
transmit. (default)
• S(MAIN) : Outputs the receiving signal strength level
during receive.
• Po
: Outputs the transmitting power level dur-
ing transmit.
• SWR
: Outputs the VSWR level during transmit.
• ALC
: Outputs the ALC level during transmit.
• COMP
: Outputs the compression level during
transmit.
• V
D
: Outputs the drain terminal voltage of the
final amplifier MOS-FETs.
• I
D
: Outputs the drain current of the final am-
plifier MOS-FETs.
Sets the output level for an external meter indication
(main readout) with in 0 to 100% range in 1% steps.
• Approx. 2.5 V at 50% (default) setting for full-scale indica-
tion. (4.7 k
Ω
impedance)
Sets the output level for an external meter indication
(sub readout) with in 0 to 100% range in 1% steps.
• Approx. 2.5 V at 50% (default) setting for full-scale indica-
tion. (4.7 k
Ω
impedance)