![background image](http://html2.mh-extra.com/html/icom/ic-7800/ic-7800_instruction-manual_4148585024.webp)
■
LCD display
q
BAND WIDTH INDICATOR
(p. 5-12)
Shows the passband width of the IF filter.
w
MODE INDICATOR
Shows the selected mode.
e
SHIFT FREQUENCY INDICATOR
(p. 5-12)
Shows the shift frequency of the IF filter.
r
QUICK TUNING INDICATOR
(p. 3-6)
Appears when the quick tuning step function is in use.
t
PASSBAND WIDTH INDICATOR
(p. 5-12)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
y
BANDPASS FILTER INDICATOR
Appears when the narrow filter (500 Hz or less) is
selected during CW, RTTY or PSK31 operation.
u
RTTY TUNING INDICATOR
Shows the tuning level in RTTY mode.
i
CLOCK READOUT
Shows the current time.
o
S/RF METER
(p. 3-10)
Shows the signal strength while receiving. Shows
the relative output power, SWR, ALC or compres-
sion levels while transmitting.
!0
TX INDICATOR
Indicates the frequency readout for transmit.
!1
VFO/MEMORY CHANNEL INDICATOR
(p. 3-3)
Indicates the VFO mode or selected memory chan-
nel number.
!2
IF FILTER INDICATOR
Shows the selected IF filter number.
!3
FREQUENCY READOUTS
Shows the operating frequency.
• Gray characters are used for non-active readout.
!4
SELECT MEMORY CHANNEL INDICATOR
(p. 9-7)
Indicates the displayed memory channel is set as a
select memory channel.
!5
MEMORY CHANNEL READOUTS
➥
Shows the selected memory channel contents in
VFO mode.
➥
Shows the VFO contents in memory mode.
!6
MULTI-FUNCTION SWITCH GUIDE
Indicates the function of the multi-function switches.
!7
LCD FUNCTION SWITCH GUIDE
Indicates the function of the LCD function switches
([F-1] – [F-7]).
!8
MULTI-FUNCTION SCREEN
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
channel, scan, memory keyer, RTTY decoder, PSK
decoder, IF filter selection or set modes, etc.
1-14
1
PANEL DESCRIPTION
q
w
e
t
u
y
i
r
q
w
e
t
u
y
r
!7
!4
!5
!6
!4
!5
!3
!2
!1
!0
o
!8